5ml to Unlimited Magnetic Gear Pump Filling Machine with 6 Heads
Application
1) Can fill liquid,oil, juice, perfume, ink, water, etc for all containers such as bottles, jars, cans, etc
2) Widely used in cosmetic, drinks, chemical, medical, food industry etc, which can highly improve productivity and product quality.
3) Apply for oil, washing liquid, acid liquid, liquid filling high etching solution , highly corrosive liquid.
Introduction
1.The pump head is drive by magnetic power, the pump head is not connected with the motor, so don’t worry the motor will over load or leakage by the connecting shaft.
2. The pump head and motor are made in Japan, and the electric parts are made in Taiwan, with high quality and longer use life.
3.The pump head is made of 316L stainless steel which is anti-erode glove,and anti-corrosion.
4. Start or brake by frequency converter control which will control the rotating speed with precision of 0.01s. So, that makes the filling deviation less than 2%.
5. Filling range can be from 5ml up to the filling time you set.
6. It can be control by the manual model, foot pedal switch, also can be automatic and adjust the cycling time.
7. It can be used for almost all liquid filling, specially for oil, Washing fluid, Acid-base fluid, corrosive liquid,etc.
|
Technical Parameters
|
|
|
Voltage
|
220V 50/60Hz
|
|
Power
|
80W
|
|
Deviation
|
±2%
|
|
Cooling by
|
Air cooling
|
|
Filling range
|
5-5000ml depend on filling time
|
|
Size
|
350*320*200MM
|
There will be no further notification if the appearance or parameters of our products are modified.
Working process
A. turn on the filler
B . Set the filling time depend on your bottle volume(adjust by the add button )and set the filling speed.
C. adjust the waiting time depend on the gap time you need(adjust by the add button ).
D. There are two models for the “counter”, model one is: when the red light is on, and the filler will work until the number you have set, that means, if you set 20, the filler will stop after filling 20 times. Model two is: the red light is off, the counter will record the filling times.
E. The decimal point can be moved by press the " button"
F Setting .Using this button can let you set the filling range easily, press this button before filling, and the it will fill when you press that, and then wait the filling, when your bottle is full, then press that button again, then the filling range is been set and the filler will remember this data and you can use for next filling.
